AISI-301, 303, 304, 304L, 304LN, 304N, 304H, 309, 310, 310S, 310H, 316, 316L, 316L Urea Grade, 316N, 316LN, 316H, 316TN, 317L, 347, 347H, 321, 321H, 329,330, 409, 409M, 410, 410S, 414, 416, 420, 430, 430F, 431, 431'T', 440-A/B/C, 904L,17.4PH, else all Grades.

Seamless , Semi-Welded , ERW Pipes , Tubes , Heat Exchanger pipes & tubes as per ASTM A 213 , 312 , 358 , 270 , 249 etc . in 1 / 8 “ OD /NB & above , also huge diameters fabricated pipes in all wall thickness of 27 swg to 36 mm & in all Schedule Thickness , in Solution Annealed , Half Hard & Hardened Condition . Tubes / Pipes available in Coil form and ‘U’ Bend Tubes. Injection Tubes & Diary Polished Tubes / Pipes Available

B/W as per ASTM-A 403 AND S/W as per ASTM-A 182 Elbow , Tees , Couplings , End Caps , Stub-Ends, Reducer , Union , Flanges , Nipples, Short Radius , Long Radius Bends of 1D/1.5D/2.5D/3D/5D/10D, Instrumentation Fittings , Fastners, Nut Bolt, Allen Head Cap, C.S.K. Head Plug Etc. Fittings can be mfr. As per your Drawings/ Specifications, Ferrule Fittings of Parker , Swagelok, Irmeto & Olive makes available.

As per ASTM A 240.Imported & Indigenous in HR & CR Condition in the thickness of 0.01mm up to 150mm in Width of 1mtr , 4ft, 5ft, 6ft , 2mtr , 8ft , 10Ft & above width in standard length or your required length , also in coil form. Also can be made available in cut strips in coil form or in straight length as per your required size , width & length. Sheets / coils available in all finishes viz. No.1, 2B , 2D , 4 Mirror , BA , Hairline , Matt Finish , PVC Coated . We stock all types of Design sheets for Architectual and Interior Decorative Purposes . Sheets / Coils available in EDD . DD Quarter Hard , Half Hard And Spring Hardened & Tempered Condition in all Grades .
Also available Perforated Sheet / Coil, Wire-Mesh , Wire Cloth, Filters Etc as per your Mesh Sizes .

(90:10 & 70:30) & Alloys as per BS and IS Standards, Stainless-Solid drawn, & Annealed Tubes and Pipes in sizes of 1/8" OD to 12" OD and wall Thickness of 27 swg to 1swg and Ditties, Finned Tubes in all sizes, Refrigeration quality Super Annealed Copper Tubes and Capilary Tubes of all Sizes in Length of 15, 30, 50, 100, 200, and 1000 mtrs Coil form and also to your cut to Length Sizes, PVC Coated Copper, Cuppro Nickel Tubes/Coils and Multicore PVC Coated Pipes ares also available.

Nickel-200, Monel-400, Inconel-600, 625, Incoloy, Alloy-800, 825, DS, Nimonic, Hastelloy, Alloy-20, Nichrome, Titanium, Zirconium etc, in all Graded in form of Plates, Sheets, Coils, Shims, Flats, Pipes, Tubes, Structurals, Pipes Fittings, Rounds, Shafts, Forging, Wire, Wire Mesh, etc in all Sizes.

Round Bars, Square, Hexagonal, Strips, Bus Bar, Wires, Plates, Coils, Sheets, Shims (8' x 4' & above) in all Thickness cut to your Sizes in Brass & Naval Brass.

Brass Tubes, Pipes, Admirality Brass Tubes, Aluminium Brass Tube of all sizes as per BS ans IS Standard.

Gun Metal, Phosphor Bronze, Aluminium Bronze (Extruded, Rolled & Casting) in form of Rounds, Brushes, Flats etc in all Sizes and all Grades.

Cold Rolled & Hot Rolled High Conductivity Electrolytic Grade Copper & Copper Alloys viz. Cuppro- Nickel , Tellurium Copper , Cadmium Copper, Chromium Copper, Berryllium Copper , else all qualities in forms of Coils , Sheets , Plates ( in all sizes 8’ X 4’ & ABOVE ) in all thickness, also cut to your sizes.

As per IS, BS, Canada, and Equivalent Specification on forms of Sheet, Coil, Shims, Rolls, Plates, Flats, Round Bars, Square, Hexagonal, Pipes, Square and Rectangular Tube, Ignots, Pipe Fittings and Plate Cuts and Sections PVC Coated Sheets and Coils available in all Finishes 1S, 2S etc. Sheet, Coils, Plates available in EDD, DD, 'O' Grade, H2 & H4 Condition.

For Hydraulic Pressure Carbon Steel Tubes/ Pipes of ASTM-A-106 Gr. A/B, ASTM A-53 in all Series, BS. 3059 Part I & II, SA 179 and Other Grades IBR approved Pipes and Heat Exchanger Tubes.IS 1239 MS and Galvanished Pipes, Casing Pipes, ERW, Spiral Welded M.S. Rectangular, Oval & Square Tubes (CRCA & HR) in all Sizes, Thickness and Scheduled & Other all Grades.

Plates available as per ASTM A 387, SA 204 Gr 'A'/ 'B', 15M03 in all Grades and in above Mentioned Sizes & Thickness Profiles done. Round Bars as per ASTM A182 F11, F22, 3,5,9 and LF2. Pipe Fitting as per ASTM A234 and ASTM A182 in all Grades and Sizes.

All Grades of Imported & Indeginious, Maraging Steel, En-series, Tool Steel, Silver, P-20, Hot-Die Steel H-13, H-11 etc HCHCR, WPS etc in forms of Rounds, Flats, Plates, Squares, Hexagonals and Forged Blocks etc.

Electrolytic, Commercial & Alloys, else all grades in form of Sheets, Coils, Plates, Flats, Pipes, Tubes, Rods, Ingoted etc. in all sizes.

7 Kamal House, Maruti Mandir Marg,
(5th kumbharwada), Mumbai 400 004.INDIA
(O).:091-22-23865274 / 66393654 fax:091 22 23852802
email:kamalmetal@rediffmail.com , info@kamalmetal.com